Personal tools
Document Actions

Publications

Journal/Archival Papers

(Email me if you are interested in a pdf copy)

 

A. A. Ibrahim and M. A. Jog, "Nonlinear Instability of an Annular Liquid Sheet Exposed to Gas Flow," International Journal of Multiphase Flow, Vol. 34(7), 647-667, 2008.

A. Mandal, M. A. Jog, J. Xue, and A. A. Ibrahim, "Flow of Power-Law Fluids in Simplex Atomizers," International Journal of Heat and Fluid Flow, Vol. 29 (5), pp.1494-1503, 2008

A. Subramani, M.A. Jog, and R.M. Manglik, "Air-Water Ebullience Systems: Visualizing Single Bubble to Wave Instability Signatures," Journal of Heat Transfer, Vol. 130(8), 080905-1, 2008.

A. Sanjeev, O. Huzayyin, K. P. Gatne, R. M. Manglik and M. A. Jog, "Short Time Impact and Cooling of Water Droplets Impinging on Hydrophobic and Hydrophilic Surfaces," Journal of Heat Transfer, Vol. 130(8), 080903-1, 2008.

G. S. Reddy, M. A. Jog, and J. A. Sekhar, "Innovation with Low-Ionization Plasma Sources for Enhanced Aluminum Processing," Key Engineering Materials, Vol. 380, pp. 209-225, 2008.

K. P. Gatne, R. M. Manglik, and M. A. Jog, "Visualization of Fracture Dynamics of Droplet Recoil on Hydrophobic Surface," Journal of Heat Transfer, Vol. 129(8), 931, 2007.

K. N. Bhagat, G. S. Reddy, M. A. Jog, R. Aust, V. Vasudevan, and J. A. Sekhar, "A Technique to Determine the Emissivity with Temperature of Fe-5.8%Al 22%Cr Alloy Surface," Metallurgical and Materials Transactions B, Vol. 38(8), 725-728, 2007.

K. Yerra, R. M. Manglik, and M. A. Jog, "Optimization of Heat Transfer Enhancement in Single Phase Tubeside Flows with Twisted-Tape Inserts," International Journal of Heat Exchangers, Vol. 7(1), 117-138, 2007.

A. A. Ibrahim and M. A. Jog, "Nonlinear Breakup Model for a Liquid Sheet Emanating From a Pressure-Swirl Atomizer," Journal of Engineering for Gas Turbine and Power, Vol. 129(4), 945-953, 2007.

A. Ibrahim and M. A. Jog, "Dynamics of Two-Phase Flow in Pressure-Swirl Atomizers," Recent Research Developments in Applied Physics, Vol. 9, pp. 1-20, 2006

A. A. Ibrahim and M. A. Jog, "Nonlinear Breakup of a Coaxial Liquid Jet in a Swirling Gas Stream," Physics of Fluids, Vol. 18(11), 4101-11, 2006. 

A. A. Ibrahim, M. A. Jog, and S. M. Jeng, "Effect of Liquid Swirl Velocity Profile on the Instability of a Swirling Annular Liquid Sheet," Atomization and Sprays, vol. 16, No. 3, pp. 237-263, 2006. 

R. M. Manglik, M. A. Jog, A. Subramani, and K. Gatne, "Mili-Scale Visualization of Bubble Growth-Translation and Droplet Impact Dynamics," Journal of Heat Transfer, Vol. 128, pp. 736, 2006.

V. Rajamani, R. Anand, G. S. Reddy, J. A. Sekhar, and M. A. Jog, "Heat Transfer Enhancement using Weakly-Ionized, Atmospheric-Pressure Plasma in Metallurgical Applications," Metallurgical and Materials Transactions B, Vol. 37, pp. 565-570, 2006.

A. A. Ibrahim and M. A. Jog, "Effects of Liquid and Air Swirl on the Instability of an Annular Liquid Sheet," Acta Mechanica, Vol. 186, 113-133, 2006 (PDF 728K).

G. S. Reddy, B. Kandell, M. A. Jog, and J. A. Sekhar, "Low Ionization Plasma Sources for Enhanced Aluminum Processing for Energy Savings, Environmental Benefit and Increased Productivity," International Journal of Thermal Technology, pp. 49-52, 2006.

R. Subramanian and M. A. Jog, "Enhancement of Heat Transfer by an Electric Field for a Drop Translating at Intermediate Reynolds Number," Journal of Heat Transfer, vol. 127, 1087-1095, 2005

Y. Wen and M. A. Jog, "Variable Property, Laminar, Continuum Plasma Flow over Non-Spherical Particles," International Journal of Heat and Fluid Flow, Vol. 26, No. 5, pp. 780-791, 2005 (PDF 346K)

J. Xue, M. A. Jog, S. M. Jeng, and M. A. Benjamin, "Effect of Atomizer Geometry on the Performance of Simplex Atomizer," AIAA Journal, Vol 42, No. 11, pp. 2408-2415, 2004. (PDF 445K)

Q. Zhang and M. A. Jog, "Heat Transfer to a Particle from Thermal Plasma," JSME, pp. 340-346, 2003.

Y. Liao, S. M. Jeng, M. A. Jog, and M. A. Benjamin, "Instability of a Liquid Sheet Surrounded by Swirling Air Streams," AIAA Journal, vol. 38, No. 3, pp. 453-460, 2002.

J. Xue, M. A. Jog, S. M. Jeng, E. Steinthorsson, M. A. Benjamin, "Influence of Geometry on the Performance of Simplex Nozzles," ILASS, 2002

Y. Liao, S. M. Jeng, M. A. Jog, and M. A. Benjamin, "An Advanced Sub-Model for Airblast Atomizer," AIAA Journal of Propulsion and Power, Vol. 17, pp. 411-417, 2001.

M. A. Jog, "On the Development of a Comprehensive Atomization Model," Advances in Combustion, 2001.

Y. Wen, A. Verma and M. A. Jog, "Plasma Flow over Non-spherical Particles in Plasma Spraying," Heat and Mass Transfer, pp. 1185-1190, 2000.

T. Sakman, M. A. Jog, S. M. Jeng, and M. A. Benjamin, "Parametric Study of Simplex Fuel Nozzle Internal Flow and Performance," AIAA Journal, vol. 38, pp. 1214-1218, 2000.

A. Verma and M. A. Jog, "Plasma Flow over an Array of Particles," International Journal of Heat and Mass Transfer, Vol. 43, pp.101-112, 2000.

Y. Liao, S. M. Jeng, M. A. Jog, and M. A. Benjamin, "Air Swirl Effect on the Instability of a Viscous Liquid Jet," Journal of Fluid Mechanics, Vol. 424, pp. 1-10, 2000.

P. Fang, R. M. Manglik, and M. A. Jog, "Characteristics of Laminar Viscous Shear-Thinning Fluid Flows in Eccentric Annular Channels," Journal of non-Newtonian Fluid Mechanics, Vol. 84, pp. 1-17, 1999.

Y. Liao, A. T. Sakman, S. M. Jeng, M. A. Jog, and M. A. Benjamin, "A Comprehensive Model to Predict Simplex Atomizer Performance," Journal of Engineering for Gas Turbines and Power, Vol. 121, pp. 285-294, 1999. (PDF 545K)

R. Sadasiavm, R. M. Manglik, and M. A. Jog, "Fully Developed Forced Convection Through Trapezoidal and Hexagonal Ducts," International Journal of Heat and Mass Transfer, Vol. 42, pp. 4321-4331, 1999.

F. H. Jeddy, M. A. Jog, and J. A. Sekhar, "Convective Heating below 1000oC," Advanced Materials & Processes, Vol. 154, No. 4, pp. 213-216, 1999.

S. M. Jeng, M. A. Jog, and M. A. Benjamin, "Computational and Experimental Study of Liquid Sheet Emanating from Simplex Nozzle," AIAA Journal, Vol. 36, No. 2, pp. 201-207, 1998. (PDF 519K)

M. A. Hader and M. A. Jog, "Continuum Plasma Flow Past a Sphere," Physics of Plasmas, Vol. 5, No. 4, pp. 902-909, 1998.

T. Harms, M. A. Jog, and R. M. Manglik, "Effect of Temperature Dependent Viscosity and boundary Conditions on Fully Developed Forced Convection Heat Transfer in a Semi-Circular Duct," Journal of Heat Transfer, Vol. 120, No. 3, pp. 600-605, 1998.

M. A. Hader and M. A. Jog, "Effect of Drop Deformation on the Heat Transfer to a Drop Suspended in an Electric Field," Journal of Heat Transfer, Vol. 120, No. 3, pp. 682-689, 1998.

S. G. Klemick, M. A. Jog, and P. S. Ayyaswamy, "Numerical Evaluation of Heat Clearance Properties of a Radiatively Heated Biological Tissue," Numerical Heat Transfer: Part A Applications, Vol. 31, No. 5, pp. 451-467, 1997. (PDF 450K)

M. A. Jog and M. A. Hader, "Transient Heat Transfer to a Deformed Drop Suspended in an Electric Field," International Journal of Heat and Fluid Flow, Vol. 18, pp. 411-418, 1997.

M. A. Jog, P. S. Ayyaswamy, and I. M. Cohen, "Influence of Elasto-Plastic Behavior of Epoxy on Stresses and Strains in TAB Packaging," International Journal of Microcircuits and Electronic Packaging, vol. 19, no. 3, pp. 308-311, 1996.

M. A. Jog, P. S. Ayyaswamy, and I. M. Cohen, "Evaporation and Combustion of a Slowly Moving Liquid Fuel Droplet: Higher Order Theory," Journal of Fluid Mechanics, vol. 307, pp. 135-165, 1996.

M. A. Jog and L. Huang, "Transient Heating and Melting of Particles in Plasma Coating Process," Journal of Heat Transfer, vol. 118, pp. 471-477, 1996.

M. A. Jog, "Analysis of Heat Transfer to a Spherical Particle from Continuum Plasma," Journal of Applied Physics, vol. 78, pp. 1424-1429, 1995.

M. A. Jog, P. S. Ayyaswamy, I. M. Cohen, "Heat Transfer in Wire Bonding Process," Journal of Electronic Packaging, vol. 116, pp. 44-48, 1994.

M. A. Jog, L. J. Huang, and P. S. Ayyaswamy, "Heat Clearance Properties of a Biological Tissue," Heat and Mass Transfer, Tata McGraw-Hill, pp. 85-93, 1994.

M. A. Jog, P. S. Ayyaswamy, I. M. Cohen, "Analysis and Simulation of Thermal Transients and Resultant Stresses and Strains in TAB Packaging," Journal of Electronic Packaging, vol. 115, pp. 34-38, 1993.

M. A. Jog, I. M. Cohen, and P. S. Ayyaswamy, "Electrode Heating in a Wire-to-Plane Arc," Physics of Fluids, vol. B 4, pp. 465-472, 1992.

L. J. Huang, M. A. Jog, I. M. Cohen, and P. S. Ayyaswamy, "Effect of Polarity on Heat Transfer in Ball Formation Process," Journal of Electronic Packaging, vol. 111, pp. 33-39, 1991.

M. A. Jog, I. M. Cohen, and P. S. Ayyaswamy, "Breakdown of a Wire-to-Plane Discharge," Physics of Fluids, vol. B 3, pp. 3532-3536, 1991.

Publications in Refereed Conference Proceedings

S. K. Kasimsetty, R. M. Manglik, and M. A. Jog, "Computational Modeling of Dynamics of Single Bubbles Emanating from Capillary-Tube Orifice in an Isothermal Liquid Pool," Paper No. IMECE2008-69251, Proceedings of 2008 ASME IMECE, Boston, MA, October 31- November 6, 2008.

P. P. Venkata, M. A. Jog, and R. M. Manglik, "Computational Modeling of Planar SOFC: Effects of Volatile Species Oxidant Mass Flow Rate and Electrochemical Reaction Rate," Paper No. IMECE2008-69249, Proceedings of 2008 ASME IMECE, Boston, MA, October 31-November 6, 2008

A. Sanjeev, M. A. Jog, and R. M. Manglik, "Computational Simulation of Surfactant-Induced Interfacial Modification of Droplet Impact and Heat Transfer," Proceedings of the 21st Annual Meeting of the Institute for Liquid Atomization of Spray Systems, Orlando, FL, May 18-21, 2008

A. Subramani, S.K. Kasimsetty, R. M. Manglik, and M. A. Jog, "Computational and Experimental Characterization of Single Bubble Dynamics," Paper No. FEDSM2007-37711, Proceedings of Fifth Joint ASME/JSME Fluids Engineering Conference, San Diego, CA, July 30 - August 2, 2007

K. P. Gatne, R. M. Manglik, and M. A. Jog, "Molecular-Scale Reagent Transport-Induced Modification of Low Weber Number Droplet Impact Dynamics," Paper No. HT2007-32087, Proceedings of 2007 ASME-JSME Thermal Engineering and Summer Heat Transfer Conference, Vancouver, Canada, July 2007.

A. Subramani, M. A. Jog, and R. M. Manglik, "Experimental Study of Single-Bubble Dynamics in Isothermal Liquid Pools: Effects of Fluid Properties, Orifice Diameter and Flow Rate," Paper No. IMECE2007-43442, Proceedings of 2007 ASME IMECE, Seattle, WA, November 2007.

A. Sanjeev, K. P. Gatne, R. M. Manglik, and M. A. Jog, "Experiments and Simulations of Spreading, Impact, and Recoil of Surfactant Solution Droplets on a Hydrophobic Surface," Proceedings of 20th Annual Meeting of the Institute for Liquid Atomization of Spray Systems, Chicago, IL, May 2007

S.K. Kasimsetty, A. Subramani, R. M. Manglik, and M. A. Jog, "Theoretical and Experimental Investigation of Single Bubble Dynamics in a Liquid Pool," Paper No. HT2007-32088, Proceedings of 2007 ASME-JSME Thermal Engineering and Summer Heat Transfer Conference, Vancouver, Canada, July 2007.

A. Sanjeev, O. Huzzayin, K. P. Gatne, R. M. Manglik, and M. A. Jog, "Impact Dynamics and Cooling of Water Droplets Impinging on Hydrophobic and Hydrophilic Surfaces," Proceedings of 20th Annual Meeting of the Institute for Liquid Atomization of Spray Systems, Chicago, IL, May 2007

R. M. Manglik, M. A. Jog and Y. Liu, "Linkage Between Learning Styles and Design Engineering Perceptions of Undergraduate Students," Paper No. IMECE2006-15597. Proceedings of the 2006 ASME International Mechanical Engineering Conference and Exposition, Chicago, IL, November 2006.

A. A. Ibrahim and M. A. Jog, "Breakup Model for Annular Liquid Sheets," Paper No. IMECE2006-14802. Proceedings of the 2006 ASME International Mechanical Engineering Conference and Exposition, Chicago, IL, November 2006.

K. Gatne, M. A. Jog and R. M. Manglik, "Experimental Investigation of Droplet Dynamics on Solid Surfaces: Spreading and Recoil Effects," Paper No. IMECE2006-14699. Proceedings of the 2006 ASME International Mechanical Engineering Conference and Exposition, Chicago, IL, November 2006.

S. K. Kasimsetty, A. Subramani, R. M. Manglik and M. A. Jog, "Computational Modeling and Experimental Measurements of Single Bubble Dynamics from a Submerged Orifice in a Liquid Pool," Paper No. IMECE2006-14693. Proceedings of the 2006 ASME International Mechanical Engineering Conference and Exposition, Chicago, IL, November 2006.

Y. Magar, R. M. Manglik and M. A. Jog, "Computational Modeling of Enhanced Convective Heat And Mass Transfer in Planar Solid Oxide Fuel Cells," Paper No. IMECE2006-13779. To appear in the Proceedings of the 2006 ASME International Mechanical Engineering Conference and Exposition, Chicago, IL, November 2006

A. Ibrahim, M. A. Jog, and S. M. Jeng, "Three-Dimensional Simulation of Flow in Pressure-Swirl Atomizers," ILASS Americas, Proceedings of the 19th Annual Conference on Liquid Atomization and Spray Systems, Toronto, Canada, May 2006 (PDF K)

A. Ibrahim and M. A. Jog, "Liquid Jet Breakup in a Swirling Gas Stream," ILASS Americas, Proceedings of the 19th Annual Conference on Liquid Atomization and Spray Systems, Toronto, Canada, May 2006 (PDF K)

S. S. V. V. Kongara and M. A. Jog, "Instability of a Viscoelastic Fluid Sheet," ILASS Americas, Proceedings of the 19th Annual Conference on Liquid Atomization and Spray Systems, Toronto, Canada, May 2006 (PDF K)

R. Subramanian and M. A. Jog, "Droplet Heating in a Direct Contact Heat Exchanger," Paper no. 2005-IMECE-79787, Proceedings of the 2005 ASME International Mechanical Engineering Conference and Exposition, Orlando, FL, November 2005

A. A. Ibrahim and M. A. Jog, "Weakly Nonlinear Instability of An Annular Liquid Sheet Subjected to Unequal Inner and Outer Gas Streams," Paper no. 2005-IMECE-81647, Proceedings of the 2005 ASME International Mechanical Engineering Conference and Exposition, Orlando, FL, November 2005.

A. A. Ibrahim and M. A. Jog, "Modeling of Gas-Liquid Flow in Pressure Swirl Atomizers," Paper no. 2005-IMECE-81579, Proceedings of the 2005 ASME International Mechanical Engineering Conference and Exposition, Orlando, FL, November 2005.

V. Rajamani, R. Anand, G. S. Reddy, J. Sekhar, and M. A. Jog, "Enhancement of Heat Transfer with Plasma Flow in Materials Processing Application," Paper no. 2005-IMECE-79782, Proceedings of the 2005 ASME International Mechanical Engineering Conference and Exposition, Orlando, FL, November 2005.

A. A. Ibrahim, M. A. Jog, and S. M. Jeng, "Computational Simulation of Two-Phase Flow in Simplex Atomizers," ILASS Americas, Proceedings of the 18th Annual Conference on Liquid Atomization and Spray Systems, Irvine, CA, May 2005.

J. Sekar, A. A. Ibrahim, and M. A. Jog, "Effect of liquid viscosity on the instability of a swirling annular liquid sheet," ILASS Americas, Proceedings of the 18th Annual Conference on Liquid Atomization and Spray Systems, Irvine, CA, May 2005.

Ashraf A. Ibrahim, M. A. Jog, and S. M. Jeng, "Effect of Liquid Swirl Velocity Profile on Mean Droplet Diameter Predictions for Simplex Atomizers," ILASS Americas, Proceedings of the 17th Annual Conference on Liquid Atomization and Spray Systems, Arlington, VA, May 2004

J. Xue, M. A. Jog, and S. M. Jeng, "Numerical Simulation of Flow of Power-Law Fluid in a Pressure-Swirl Atomizer," ILASS Americas, Proceedings of the 17th Annual Conference on Liquid Atomization and Spray Systems, Arlington, VA, May 2004.

Q. Zhang and M. A. Jog, "Analysis of Heat Transfer to a Particle from Thermal Plasma," Proceedings of the 6th ASME-JSME Joint Conference, March 2003.

Holcomb, M. D., Slusher, S. T., Rajamohan, D., Jog, M.A., Back, L. H., and Banerjee, R. K. "Basal to hyperemic pulsatile flow in a deployed coronary stent," IMECE-43148, Proceedings of ASME International Mechanical Engineering Congress and Exposition, Washington, DC, November 2003.

Y. Wen and M. A. Jog, "Effect of Temperature Dependent Properties and Particle Shape on Heat Transfer in Plasma Flow," IMECE2003-42015, Proceedings of IMECE 2003: International Mechanical Engineering Congress and Exposition, Washington, DC, November 2003.

J. Xue, M. A. Jog, S. M. Jeng, E. Steinthorsson, M. A. Benjamin, "Computational Model to Predict Flow in Simplex Fuel Atomizer," AIAA 2002-3710, Proceedings of the 38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, June 7-10, 2002, Indianapolis, IN

J. Xue, M. A. Jog, S. M. Jeng, E. Steinthorsson, M. A. Benjamin, "Influence of Geometry on the Performance of Simplex Nozzles under Constant Pressure Drop," Proceedings of ILASS Americas, 15th Annual Conference on Liquid Atomization and Spray Systems, Madison, WI, May 2002

Q. Zhang and M. A. Jog, "Kinetic Theory Treatment for Heat Transfer in Plasma Spraying," IMECE2002-33079, Proceedings of 2002 ASME-IMECE, New Orleans, LA, 2002.

Y. Liao, S. M. Jeng, M. A. Jog, and M. A. Benjamin, "On the Mechanism of Pressure-Swirl Airblast Atomization," AIAA Paper No. 2001-3571. Also presented at the 37th AIAA /SAE /ASME Joint Propulsion Conference, Salt Lake City, UT, July 8-11, 2001.

J. Xue, M. A. Jog, S. M. Jeng, and M. A. Benjamin, "Effect of Atomizer Geometry on the Performance of Simplex fuel Atomizer," Proceedings of the15th International Symposium on Air Breathing Engines, Banglore, September 5-10, 2001.

S. Samudra and M. A. Jog, "Heat Transfer to a Spherical Particle in Plasma: Kinetic Theory Approach," Proceedings of the ASME IMECE, New York, NY, November 11-16, 2001.

P. Fang, R. M. Manglik, and M. A. Jog, "Numerical Modeling of Flow Behavior in Drilling Bore Wells: Effect of Annuli Eccentricity and Inner Cylinder Rotation," Proceedings of the 8th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, March 2000.

Y. Liao, S. M. Jeng, M. A. Jog, and M. A. Benjamin, "A Theoretical Parametric Study of the Instability of a Viscous Annular Liquid Sheet," ICLASS-200, Proceeding of the International Conference on Liquid Atomization and Spray Systems, Pasadena, CA, July 2000.

V. M. Wasekar, R. M. Manglik, and M. A. Jog, "Numerical Investigation of Marangoni Convection Around a Vapor Bubble in Aqueous Surfactant Solutions," Proceedings of the ASME HTD, IMECE, Orlando, FL, November 2000.

Y. Liao, S. M. Jeng, M. A. Jog, and M. A. Benjamin, "Instability of a Viscous Annular Liquid Sheet Subject to Swirling Air Streams," Proceedings of the 12th Annual Conference on Liquid Atomization and Spray Systems, ILASS, Irvine, CA, pp. 385-389, 1999.

Y. Liao, S. M. Jeng, M. A. Jog, and M. A. Benjamin, "A Theoretical Model to Predict Mean Drop Size in Simplex Atomizers," Proceedings of the 12th Annual Conference on Liquid Atomization and Spray Systems, ILASS, Irvine, CA, pp. 355-359, 1999.

Y. Liao, S. M. Jeng, M. A. Jog, and M. A. Benjamin, "Air Swirl Effect on the Instability of a Viscous Liquid Jet," ASME Paper No. 99-7368, Also presented at the 7th International Symposium on Gas-Liquid Two-Phase Flows, San Francisco, CA, June 22-26, 1999.

Y. Liao, S. M. Jeng, M. A. Jog, and M. A. Benjamin, "An Advanced Sub-model for Airblast Atomizer," AIAA Paper No. 99-2207. Proceedings of the 35th AIAA /SAE /ASME Joint Propulsion Conference, Los Angeles, CA, June 20-24, 1999.

Y. Liao, S. M. Jeng, M. A. Jog, and M. A. Benjamin, "Break-up of an Annular Liquid Sheet Downstream of an Airblast Atomizer," Proceedings of the 14th International Symposium on Air Breathing Engines, Florence, Italy, September 5-10, 1999.

Y. Liao, S. M. Jeng, M. A. Jog, and M. A. Benjamin, "Disintegration of an Annular Liquid Sheet Subject to Swirling Air Streams," Proceedings of the 11th Annual Conference on Liquid Atomization and Spray Systems, ILASS, Irvine, CA, pp. 165-169, 1998.

Y. Liao, S. M. Jeng, M. A. Jog, and M. A. Benjamin, "Atomization of a Liquid Jet Under Swirling Air Streams," SAE Paper No. 98FL-403. Proceedings of the Fuels and Lubricants Conference, Society of Automotive Engineers, San Francisco, CA, Nov. 1998.

T. Sakman, M. A. Jog, S. M. Jeng, and M. A. Benjamin, "A Numerical Parametric Study of Simplex Nozzle Internal Flow and Performance," AIAA Paper No. 98-3906. Proceedings of the 34th AIAA/SAE/ASME Joint Propulsion Conference, Cleveland, July 13-15, 1998.

Y. Liao, S. M. Jeng, M. A. Jog, and M. A. Benjamin, "Instability of a Liquid Sheet Surrounded by Swirling Air Streams," AIAA Paper No. 98-3832. Proceedings of the 34th AIAA/SAE/ASME Joint Propulsion Conference, Cleveland, July 13-15, 1998.

Y. Liao, T. Sakman, S. M. Jeng, M. A. Jog, and M. A. Benjamin, "A Comprehensive Model to Predict Simplex Atomizer Performance," ASME Paper No. 98-GT-441, Proceedings of the 43rd ASME Gas Turbine and Aeroengine Congress, International Gas Turbine Institute, Atlanta, GA. Also presented at the ASME Turbo Expo 98, Stockholm, Sweden, June 2-5, 1998.

A. Verma and M. A. Jog, "Analysis of Heat Transfer to a Spectrum of Particles in Plasma Spray Coating Process," in Heat Transfer in Materials Processing, Ed. R. A. Nelson and U. Chandra, HTD Vol. 361-4, ASME, NY, pp. 287-294, 1998. Also presented at the ASME IMECE, Anaheim, CA, November 15-21, 1998.

S. M. Jeng, M. A. Jog, and M. A. Benjamin, "Computational and Experimental Study of Liquid Sheet Emanating from Simplex Nozzle," AIAA Paper No. 97-0796. Proceedings of the AIAA Aerospace Sciences Meeting, Reno, Nevada, January 1997.

M. A. Benjamin, S. M. Jeng, and M. A. Jog, "Comparison of Simplex Nozzle Correlations with Detailed CFD and Experimental Data," Proceedings of the 10th Annual Conference on Liquid Atomization and Spray Systems, ILASS, Irvine, CA, pp. 44-49, 1997.

Y. Liao, T. Sakman, D. Holtzclaw, S. M. Jeng, M. A. Jog, and M. A. Benjamin, "Study of Flow in a Simplex Atomizer," Proceedings of the 1997 ASME Winter Annual Meeting, Dallas, TX, November 16-21, 1997.

D. Holtzclaw, T. Sakman, S. M. Jeng, M. A. Jog, and M. A. Benjamin, "Investigation of Flow in a Simplex Nozzle," AIAA Paper No. 97-2970. Proceedings of the 33rd AIAA/ASME/SAME/ASEE Joint Propulsion Conference, Seattle, WA, July 1997.

M. A. Hader, A. Verma, and M. A. Jog, "Numerical Investigation of Heat Transfer to a Non-spherical Drop Suspended in an Electric Field: Internal Problem," in Fundamentals of Bubble and Droplet Dynamics, HTD-Vol. 342, ed. S. G. Kandlikar et al., ASME, New York, pp. 59-66, 1997. Also presented at the National Heat Transfer Conference, Baltimore, MD, August 10-12, 1997.

Todd Harms, M. A. Jog, and R. M. Manglik, "Numerical Study of Fully-Developed Forced Convection Heat Transfer in a Semi-Circular Duct," in Applications in Computational Heat Transfer, ed. R. Clarksean et al., ASME, New York, pp. 31-38, 1997. Also presented at the National Heat Transfer Conference, Baltimore, MD, August 10-12, 1997.

M. A. Jog, S. M. Jeng, R. DiMicco, A. Oplaski, D. Holtzclaw and M. A. Benjamin, "Study of Liquid Sheet Emanating from Simplex Nozzle," Bulletin of the American Physical Society, Vol. 41, No. 9, page 1787-1788, 1996. Also presented at the 49th Annual Meeting of the Division of Fluid Dynamics of the American Physical Society, Syracuse, NY, November 1996.

M. A. Jog and L. J. Huang, "Heating of a Spherical Body in Thermal Plasma: Charging Effects," Bulletin of the American Physical Society, Vol. 40, No. 11, p. 1697, 1995. Also presented at the 37th Annual Meeting of the Division of Plasma Physics of the American Physical Society, Louisville, KY, November 6-10, 1995.

M. A. Jog and L. Huang, "Analysis of Particle Heating in Plasma Spray Coating Process," in Proceeding of the ASME heat Transfer Division, HTD-Vol.317-2, pp. 503-510, P. J. Prescott et al., editors, ASME, NY 1995. Also presented at the ASME Winter Annual Meeting, held at San Francisco, CA during November 12-17, 1995.

M. A. Jog, P. S. Ayyaswamy, and I. M. Cohen, "Evaporation and Combustion of a Slowly Moving Liquid Fuel Droplet: Higher Order Theory," Bulletin of the American Physical Society, Vol. 39, No. 9, page 1944, 1994. Also presented at the 47th Annual Meeting of the Division of Fluid Dynamics of the American Physical Society, Atlanta, GA, November 1994.

M. A. Jog and L. Huang, "Effect of Particle Loading on Heat Transfer in Plasma Coating Process," in Multiphase Flow and heat Transfer in Materials Processing, HTD- Vol.297/FED-Vol.201, pp. 25-31, ASME, NY, 1994. Also presented at the ASME Winter Annual Meeting, Chicago, IL, November 6-11, 1994.

M. A. Jog, P. S. Ayyaswamy, and I. M. Cohen, "Influence of Elasto-Plastic Behavior of Epoxy on Stresses and Strains in TAB Packaging," Advances in Electronic Packaging, EEP-Vol. 4-1, Editors, P. A. Engel and W. T. Chen, ASME, pp. 83-90, 1993. Also presented at the 1993 International Electronic Packaging Conference, Binghamton, NY, Sept. 29 - Oct. 2, 1993.

I. M. Cohen, C. F. Ramos, M. A. Jog, and P. S. Ayyaswamy, "Design Improvements of Bonding Machinery in Microelectronic Manufacturing," Proceedings of the 18th Design and Manufacturing Systems Conference, pp. 1001-1006, Atlanta, GA, January 8-10, 1992.

T. R. Stauffer, M. A. Jog, and P. S. Ayyaswamy, "The Effective Thermal Conductivity of Multifoil Insulation as a Function of Temperature and Pressure," AIAA Paper No. 92-2939. Also presented at the 27th AIAA Thermophysics Conference, Nashville, TN, July 6-8, 1992.

M. A. Jog, P. S. Ayyaswamy, and I. M. Cohen, "Analysis and Simulation of Thermal Transients and Resultant Stresses and Strains in TAB Packaging," in Manufacturing Processes and Materials Challenges in Microelectronic Packaging, Edited by W. T. Chen et al., AMD-Vol. 131 / EEP-Vol. 1, pp. 137-142, ASME, NY, 1991. Also presented at the ASME Winter Annual Meeting, Atlanta, GA, December 1-6, 1991.

M. A. Jog, L. J. Huang, P. S. Ayyaswamy, and I. M. Cohen, "Design Aspects of Automatic Wire Bonding Machinery," Proceedings of the 17th Design and Manufacturing Systems Conference, pp. 235-240, Austin, TX, January 9-11, 1991.

M. A. Jog, I. M. Cohen, and P. S. Ayyaswamy, "Heat Transfer in Electric Arc Welding," in Welding and Joining Processes, PED-Vol. 51, ASME, pp. 1356-142, 1991. Also presented at the ASME Winter Annual Meeting, Atlanta, GA, December 1-6, 1991.

M. A. Jog, I. M. Cohen, and P. S. Ayyaswamy, "Breakdown of a Wire-to-Plane Discharge," in GEC 90, p. 119, Proceedings of the 43rd Annual Gaseous Electronic conference, American Physical Society, Champaign-Urbana, IL, October 16-19, 1990.

L. J. Huang, M. A. Jog, I. M. Cohen, and P. S. Ayyaswamy, "Effect of Polarity on Heat Transfer in the Ball Formation Process," in Transport Phenomena in Materials Processing, HTD-Vol. 146, pp. 1-8, 1990. Also presented at the ASME Winter Annual Meeting, Dallas, TX, November 25-30, 1990.

by Webarchitect last modified 2009-06-18 13:14