Personal tools
Document Actions

Refereed Proceeding

Juntao Zhang and R.M. Manglik, Characterization of nucleate pool boiling in aqueous surfactant solutions on a cylindrical heater, 3rd International Symposium on Two-Phase Flow Modeling and Experimentation, Pisa, Italy, September 22-24, 2004. 

 

S. Sethu Raghavan and R.M. Manglik, Visualization of micro-scale bubble dynamics in pure liquids and aqueous surfactant solutions, Proc. 2004 ASME Heat Transfer/Fluids Engineering Summer Conference, ASME, New York, Paper No. HT-FED2004-56858, 2004. 

 

S. Vyas, Jiehai Zhang, and R.M. Manglik, Steady recirculation and laminar forced convection in a sinusoidal wavy channel, Proc. 2003 ASME – IMECE, HTD-Photo Gallery, 2003.

 

Juntao Zhang, R.M. Manglik, and M. Bahl, Nucleate pool boiling of a surface active polymer (HEC) solution, Proc. 2003 ASME – IMECE, ASME, New York, Paper No. IMECE2003-42311, 2003. 

 

Juntao Zhang and R.M. Manglik, Numerical investigation of single bubble dynamics during nucleate boiling in aqueous surfactant solutions, Proc. 2003 ASME Summer Heat Transfer Conference, ASME, New York, Paper No. HTD2003-47047, 2003. 

 

M. Bahl, Juntao Zhang, and R.M. Manglik, Measurement of dynamic and equilibrium surface tension of surfactant solutions by the maximum bubble pressure method, Proc. 2003 ASME Summer Heat Transfer Conference, ASME, New York, Paper No. HTD2003-47137, 2003. 

 

Jiehai Zhang, A. Muley, J.B. Borghese, and R.M. Manglik, Computational and experimental study of enhanced laminar flow heat transfer in three-dimensional sinusoidal wavy-plate-fin channels, Proc. 2003 ASME Summer Heat Transfer Conference, ASME, New York, HTD2003-40148, 2003.

 

Juntao Zhang and R.M. Manglik, Computational simulation of a single boiling bubble in water Proc. 2nd MIT Conference on Computational Fluid and Solid Mechanics, Vol. 2, Elsevier, Amsterdam, 1592-1596, 2003. 

 

Juntao Zhang and R.M. Manglik, Pool boiling heat transfer in aqueous solutions of cationic surfactants, Proc. 6th ASME – JSME Thermal Engineering Joint Conference, ASME, New York, Paper No. TED-AJ03-248, 2003. 

 

Jiehai Zhang, J. Kundu, and R.M. Manglik, Computational simulation of lateral vortex structure and enhanced laminar forced convection in wavy-plate channels, Proc. 6th ASME – JSME Thermal Engineering Joint Conference, ASME, New York, Paper No. TED-AJ03-132, 2003. 

 

Juntao Zhang and R.M. Manglik, Visualization of ebullient dynamics in aqueous surfactant solutions, Proc. of the 2002 ASME-IMECE, HTD-Photo Gallery, 2002.

 

H.M. Metwally and R.M. Manglik, Computational modeling of enhanced laminar flow heat transfer in viscoplastic fluids in corrugated-plate channels, Proc. of the 2002 ASME-IMECE, New Orleans, LA, Vol. 1, Paper No. IMECE2002-33631, 2002. 

 

A. Muley, J. Borghese, R.M. Manglik, and J. Kundu. Experimental and numerical investigation of thermal-hydraulic characteristics of wavy-channel compact heat exchanger, Proc. of the 12th International Heat Transfer Conference, Vol. 4, Société Française des Thermiciens & Elsevier, France, 417-422, 2002. 

 

Jiehai Zhang, R.M. Manglik, A. Muley, and J. Borghese, Three-dimensional numerical simulation of laminar forced convection in wavy plate-fin channels, Proc. 13th International Symposium on Transport Phenomena, Victoria, BC, Canada, July 2002. 

 

V.M. Wasekar, J. Zhang, and R.M. Manglik, Experimental investigation of dynamic and equilibrium surface tension characteristics of aqueous surfactant solutions, Proc. 5th World Conf. on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Thessaloniki, Greece, September 24-28, 2001. 

 

V.M. Wasekar and R.M. Manglik, Computation of Marangoni convection at the vapor-liquid interface in aqueous surfactant solutions, Proc. 1st MIT Conference on Computational Fluid and Solid Mechanics, Vol. 2, Elsevier, Amsterdam, 1412-1416, 2001. 

 

R.M. Manglik, The role of corrugated flow channels in promoting enhanced heat transfer in plate heat exchangers, 35th National Heat Transfer Conference, Anaheim, CA, June 2001 (Keynote paper). 

 

H.M. Metwally and R.M. Manglik, A computational study of enhanced heat transfer in laminar flows of non-Newtonian fluids in corrugated-plate channels, Advances in Enhanced Heat Transfer, HTD-Vol. 365/PID-Vol. 4, ASME, New York, 41-48, 2000. 

 

V.M. Wasekar and R.M. Manglik, Numerical investigation of Marangoni convection around a vapor bubble in aqueous surfactant solutions, Proc. of the ASME Heat Transfer Division (IMECE), HTD-Vol. 366-4, pp. 283-291, 2000. 

 

H.M. Metwally and R.M. Manglik, Numerical solutions for periodically-developed laminar flow and heat transfer in sinusoidal corrugated plate channels with constant wall temperature, Proc. 34th National Heat Transfer Conference, ASME, New York, Paper No. NHTC2000-12216, 1-8, 2000. 

 

P. Fang, R.M. Manglik, M.A. Jog, and J. Pillutla, Numerical modeling of flow behavior in drilling bore wells: Effects of annuli eccentricity and inner cylinder rotation, Proc. 8th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC – 8, Vol. 1, PCTFE, Maui, HI, 492-499, 2000. 

 

V.M. Wasekar and R.M. Manglik, Nucleate pool boiling heat transfer in aqueous anionic surfactant solutions: Effect of additive molecular weight, Proc. 4th ISHMT/ASME Heat and Mass Transfer Conference, Tata McGraw-Hill, New Delhi, 783-788, 2000. 

 

V.M. Wasekar and R.M. Manglik, Pool boiling heat transfer in aqueous surfactant solutions, Applications in Boiling Heat Transfer, Proc. ASME Heat Transfer Division – 1999, HTD-Vol. 364-2, ASME, New York, 305-313, 1999. 

 

A. Muley and R.M. Manglik, Performance optimization of a plate heat exchanger with chevron plates, Proc. of 33rd National Heat Transfer Conference, ASME, New York, Paper No. HTD99-0171, 1-8, 1999. 

 

A. Muley and R.M. Manglik, Enhanced heat transfer characteristics of a chevron plate heat exchanger for viscous fluid thermal processing applications, Applications of Heat Transfer in Equipment, Systems, and Education, HTD-Vol. 361-3/PID-Vol. 3, ASME, New York, 459-466, 1998. 

 

A. Muley and R.M. Manglik, Investigation of enhanced heat transfer in low Reynolds number flows in a plate heat exchanger, Applications of Heat Transfer in Equipment, Systems, and Education, HTD-Vol. 361-3/PID-Vol. 3, ASME, New York, 295-302, 1998. 

 

R.M. Manglik, Pool boiling characteristics of high concentration aqueous surfactant emulsions, Proc. 11th International Heat Transfer Conference, Vol. 2, KSME, Seoul, Korea, 449-453, 1998. 

 

R.M. Manglik and C. Ranganathan, Visualization of swirl flows generated by twisted-tape inserts in circular tubes, Proc. 5th World Conf. Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Edzioni ETS, Pisa, Italy, 1631-1636, 1997. 

 

R.M. Manglik and A.E. Bergles, Experimental investigation of turbulent flow heat transfer in horizontal concentric annular ducts, Proc. 5th World Conf. Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Edzioni ETS, Pisa, Italy, 1393-1400, 1997. 

 

A. Muley and R.M. Manglik, Experimental study of turbulent flow heat transfer and pressure drop in a plate heat exchanger with chevron plates, ASME Proc. 32nd National Heat Transfer Conference, Vol. 8, HTD-Vol. 346, ASME, New York, 69-76, 1997. 

 

T.M. Harms, M.A. Jog, and R.M. Manglik, Numerical predictions of laminar fully developed forced convection in a semi-circular duct with temperature-dependent viscosity variations, ASME Proc. 32nd National Heat Transfer Conference, Vol. 10, HTD-Vol. 348, ASME, New York, 31-38, 1997. 

 

R.M. Manglik and A.E. Bergles, Thermally developing laminar flows in circular-segment ducts with uniform wall temperature, Proc. 9th International Symposium on Transport Phenomena in Thermal-Fluids Engineering, Vol. 2, 831-836, 1996. 

 

R.M. Manglik, Plate heat exchangers for process industry applications: Enhanced thermal-hydraulic characteristics of chevron plates, Proc. A. E. Bergles Symposium on Process, Enhanced and Multiphase Heat Transfer, Begell House, New York, 267-276, 1996. 

 

A. Muley and R.M. Manglik, Experimental investigation of heat transfer enhancement in a PHE with b = 60° chevron plates, Proc. 2nd ISHMT-ASME Heat and Mass Transfer Conference, Tata McGraw-Hill, New Delhi, 737-744, 1995. 

 

R.M. Manglik and A. Muley, Thermal-hydraulic behavior of a mixed chevron single-pass plate-and-frame heat exchanger, ASME Proc. 30th National Heat Transfer Conference, Vol. 12, HTD-Vol. 314, ASME, New York, 89-96, 1995. 

 

R.M. Manglik and J. Prusa, Thermally developing flows of non-Newtonian fluids with viscous heating: Implications for the Nusselt number as a measure of convective heat transfer rates, General Papers in Heat and Mass Transfer, Insulation, and Turbomachinery, HTD-Vol. 271, ASME, New York, 37-44, 1994. 

 

R.M. Manglik and P.P. Fang, Second-Law analysis of heat transfer enhancement in offset-strip-fin compact heat exchangers, Proc. 10th International Heat Transfer Conference, Vol. 6, I.Chem.E, UK, 67-73, 1994. 

 

R.M. Manglik and A.E. Bergles, Influence of twisted tape generated swirl on single-phase heat transfer, Proc. 1st ISHMT-ASME Heat and Mass Transfer Conference, Tata McGraw-Hill, New Delhi, 249-256, 1994.  

 

R.M. Manglik and A.E. Bergles, Numerical predictions of fully developed laminar flows with heat transfer in circular-segment ducts, General Papers on Convection, HTD-Vol. 256, ASME, New York, 9-19, 1993. 

 

S. Polat, R.M. Manglik, and R.L. Wilkins, Forced convective boiling of a non-Newtonian liquid in a multipass plate heat exchanger, AIChE Sypmosium Series, No. 295, Vol. 89, AIChE, New York, 229-235, 1993. 

 

J. Prusa and R.M. Manglik, Asymptotic and numerical solutions for thermally developing flows of Newtonian and non-Newtonian fluids in circular tubes with uniform wall temperature, Fundamentals of Forced Convection Heat Transfer, HTD-Vol. 210, ASME, New York, 1-10, 1992. 

 

R.M. Manglik and A.E. Bergles, Heat transfer and pressure drop correlations for twisted-tape inserts in isothermal tubes: Part I – laminar flows, Enhanced Heat Transfer, HTD-Vol. 202, ASME, New York, 89-98, 1992. 

 

R.M. Manglik and A.E. Bergles, Heat transfer and pressure drop correlations for twisted-tape inserts in isothermal tubes: Part II – transition and turbulent flows, Enhanced Heat Transfer, HTD-Vol. 202, ASME, New York, 99-106, 1992. 

 

R.M. Manglik and A.E. Bergles, The thermal-hydraulic design of the rectangular offset-strip-fin compact heat exchanger, Proceedings of the A. L. London Symposium, Stanford University, March 23-24, 1989. 

 

R.M. Manglik, A.E. Bergles, and S.D. Joshi, Augmentation of heat transfer to laminar flow of non-Newtonian fluids in uniformly heated tubes with twisted-tape inserts, Proc. 1st World Conf. Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Elsevier, New York, 676-684, 1988. 

 

R.M. Manglik and A.E. Bergles, A correlation for laminar flow enhanced heat transfer in uniform wall temperature circular tubes with twisted-tape inserts, Advances in Enhanced Heat Transfer, HTD-Vol. 68, pp. 19-25, ASME, New York, 1987. 

 

Technical Reports:

 

R.M. Manglik, M. Bahl, S. Vishnubhatla, J. Zhang, Interfacial and rheological characterization of aqueous surfactant and polymer solutions, Report No. TFTPL-9, Thermal-Fluids & Thermal Processing Laboratory, University of Cincinnati, Cincinnati, OH, 2003. 

 

R.M. Manglik, and K. Yerra, Application of Twisted-Tape Inserts in Shell-and-Tube Exchangers: Optimization of Enhanced Thermal-Hydraulic Performance, Report No. TFTPL-8, Thermal-Fluids & Thermal Processing Laboratory, University of Cincinnati, December 2002. 

 

R.M. Manglik and L. You, Computational modeling of laminar swirl flows and heat transfer in circular tubes with twisted-tape inserts, Report No. TFTPL-7, Thermal-Fluids & Thermal Processing Laboratory, University of Cincinnati, September 2002. 

 

H.M. Metwally and R.M. Manglik, A computational study of enhanced laminar forced convection heat transfer to Newtonian and non-Newtonian fluid flows in sinusoidal corrugated-plate channels, Report No. TFTPL-6, Thermal-Fluids & Thermal Processing Laboratory, University of Cincinnati, July 2002. 

 

J. Kundu, and R.M. Manglik, Computational modeling of laminar forced convection in three-dimensional wavy channels, Report No. TFTPL-5, Thermal-Fluids & Thermal Processing Laboratory, University of Cincinnati, September 2001. 

 

V.M. Wasekar and R.M. Manglik, Nucleate pool boiling heat transfer in aqueous surfactant solutions, Report No. TFTPL-4, Thermal-Fluids & Thermal Processing Laboratory, University of Cincinnati, July 2001. 

 

P. Fang and R.M. Manglik, Numerical investigation of laminar forced convection in Newtonian and non-Newtonian flows in eccentric annuli, Report No. TFTPL-3, Thermal-Fluids & Thermal Processing Laboratory, University of Cincinnati, December 1998. 

 

A. Muley and R.M. Manglik, Heat transfer and pressure drop in plate heat exchangers, Report No. TFL-2, Thermal-Fluids & Thermal Processing Laboratory, University of Cincinnati, December 1998. 

 

R.M. Manglik and J. Ding, Analysis of laminar flow heat transfer characteristics of viscous power-law fluids in double-sine ducts, Thermal-Fluids Laboratory Report No. TFL-Prog-PG-5, University of Cincinnati, Cincinnati, OH, May 1996. 

 

R.M. Manglik and J. Ding, Pool boiling characteristics of surfactant emulsions, Thermal-Fluids Laboratory Report No. TFL-PG-Cont-1, Procter & Gamble Co., Cincinnati, OH, August 1995. 

R.M. Manglik and A. Muley, Thermal-hydraulic behavior of a mixed chevron single-pass plate-and-frame heat exchanger, Thermal-Fluids Laboratory Report No. TFL-Prog-PG-3, University of Cincinnati, Cincinnati, OH, March 1995.

R.M. Manglik and A. Muley, The influence of the number of thermal plates on the plate heat exchanger performance, Thermal-Fluids Laboratory Report No. TFL-Prog-PG-2, University of Cincinnati, Cincinnati, OH, May 1994. 

R.M. Manglik and A. Muley, Heat transfer and pressure drop characteristics of plate-and-frame heat exchangers: A literature review, Thermal-Fluids Laboratory Report No. TFL-Int-1, University of Cincinnati, Cincinnati, OH, September, 1993. 

R.M. Manglik and A.E. Bergles, Heat transfer enhancement of intube flows in process heat exchangers by means of twisted-tape inserts, HTL-8, Rensselaer Polytechnic Institute, Troy, NY, December 1991. 

A.E. Bergles, M.K. Jensen, E.F.C. Somerscales, and R.M. Manglik, Literature review of heat transfer enhancement technology for heat exchangers in gas-fired applications, GRI 91-0146, Gas Research Institute, Chicago, June 1991. 

A.E. Bergles and R.M. Manglik, Thermal-hydraulic design of a psyllium husk sanitizer, The Procter & Gamble Co., Cincinnati, OH, November 1988. 

R.M. Manglik and J. M. Prusa, An improved solution based on asymptotic analysis and numerical methods for the Graetz problem, ISU-ERI-Ames-88117, Iowa State University, Ames, IA, October 1987.   

R.M. Manglik, On bubble growth rates in boiling heat transfer: A case for an irreversible thermodynamic analysis of liquid-vapor phase change, ME-631, Department of Mechanical Engineering, Iowa State University, Ames, IA, December 1986. 

R.M. Manglik, Boundary-layer flow over a circular cylinder with suction/blowing: Application of panel method and Karmen-Pohlhausen approximation, EM-572, Department of Engineering Mechanics, Iowa State University, Ames, IA, May 1987. 

R.M. Manglik and A.E. Bergles, An analysis of laminar flow heat transfer in uniform temperature circular tubes with tape inserts, HTL-39, ISU-ERI-Ames-86290, Iowa State University, Ames, IA, May 1986.

 

by Webarchitect last modified 2008-10-22 12:32